Amphenol Kaye CTR-40, Руководство пользователя, Страница: 70 / 84

9 Digital Communication Interface
59
Table 5
Interface Command Summary
Command Description
Command
Format
Command
Example
Returned
Returned Example
Acceptable Values
Display Temperature
Read current set-point s[etpoint] s set: 9999.99 {C set: 150.00 C
orF}
Set current set-point to n s[etpoint]=n s=150 Instrument Range
Read vernier v[ernier] v v: 9.99999 v: 0.00000
Set vernier to n v[ernier]=n v=.00001 Depends on Configuration
Read scan function sc[an] sc scan: {ON or scan: ON
OFF}
Turn scan function on sc[an]=on sc=on
Turn scan function off
sc[an]=of[f] sc=of
Read scan rate sr[ate] sr srat: 9.999 {C or srat: 0.010 C/min
F}/min
Set scan rate to n degrees per
minute
sr[ate]= n sr=5
0.001 to 5.000°C/min
0.002 to 9.000°F/min
Read temperature t[emperature] t t: 9999.99 {C or t: 55.69 C
F}
Read temperature units u[nits] u u: x u: c
Set temperature units: u[nits]=c/f C or F
Set temperature units to Celsius u[nits]=c u=c
Set temperature units to
Fahrenheit
u[nits]=f u=f
Ramp and Soak Menu
Read number of programmable pn pn pn: 9 pn: 2
set-points
Set number of programmable
pn= n
pn=4 2 to 8
set-points to n
Read programmable set-point
number n
ps n ps3
ps n : 9999.99 {C ps1: 50.00 C
or F}
Set programmable set-point num- ps
n = n
ps3=50 1 to 8, Instrument Range
ber n to n
Read program set-point soak time pt pt ti: 999 ti: 5
Set program set-point soak time to pt= n pt=5 0 to 500
n minutes
Read program control mode pc pc prog: {OFF or prog: OFF
ON}
Set program control mode: pc=g[o]/s[top]/c[ont] GO or STOP or CONT
Start program pc=g[o] pc=g