Ampetronic d series, Инструкция по установке и эксплуатации

Страница: 4 / 48

Box Contents
• 1 x D Series Driver
• 2 x Loop connectors
• 1 x DC connector
• 1 x Installation handbook & user guide
• 2 x 2mm steel 1U rack mount brackets
• 1 x Power cable (regions specific)
•
1 x Induction Loop Sign
This symbol is used to alert the user to important
operating or maintenance instructions.
The Lightning bolt triangle is used to alert the user
to the risk of electric shock.
1. SAFETY
1 . It is important to read these instructions, and to follow them .
2 . Keep this instruction manual in an accessible place .
3 .
Clean only with a dry cloth. Cleaning fluids may effect the equipment.
4 . Do not block any ventilation openings . Install in accordance with the manufacturer’s
instructions .
5 . Do not install this equipment near any heat sources such as radiators, heating vents or other
apparatus that produces heat .
6 . WARNING – THIS APPARATUS MUST BE EARTHED / GROUNDED .
7 . Only power cords with the correct power connector may be used to maintain safety . Cables
incorporating the UK 13A fused plug, Schuko with earthing contacts and UL approved
“grounding type” are acceptable . These must be plugged into power outlets which provide a
protective earth .
8 . Refer all servicing to qualified personnel. Servicing is required when the apparatus has been
damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to any rain or
moisture, does not operate normally or has been dropped .
9 . WARNING – To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture . The apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed on the apparatus.
TO PREVENT ELECTRIC SHOCK DO NOT REMOVE THE
COVER. THERE ARE NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL
Ampetronic D Series Installation Handbook & User Guide Page 2
9.0
4.5
2.3
1.2
CURRENT (A pk)
CLIP
CH B CH A
36
28
20
12
AGC (dB)
ERROR
QUICK
MAIN
STATUS
2.1 Current
Current =-52.0dB
MENU
M U L T I L O O P D R I V E R
D SERIES
NETWORKED DUAL 14A DSP
Induction Loop Driver
~ 230V
45 - 65Hz
Power: 85W
Fuse: T 3.15A L
Designed and Engineered in the UK
D14-2
LOOP O/P CONNECTIONS
1-
2-
1+
2+
www.ampetronic.co
CHANNEL A
LOOP OUTPUT
0.1A
+12V
DC OUTPUT
Serial No.
CHANNEL B
LOOP OUTPUT
USB
(UPDATE ONLY)
ETHERNET
SLAVE IN SLAVE OUT
AC POWER INPUT
INPUT 2
MIC / LINE / AES
INPUT 1
MIC / LINE