Ampetronic d series Скачать руководство пользователя страница 26

Страница: 26 / 48

Ampetronic D Series Installation Handbook & User Guide

Page 24

MAC Address:

Media Access Control (MAC) address. This is a unique number

that all Ethernet connected devices require. This field is read only.

IP Address:

This is the IP address that the driver is currently using . Edit this

only if DHCP is disabled otherwise the DHCP will override the

entered value .

Gateway

The Gateway used for routing communication to the network .

Subnet Mask

The Subnet Mask to be used .

Primary DNS:

The address of the Domain Name System (DNS) server to be used

to resolve IP addresses .

Secondary DNS:

The address of the secondary DNS server if the first is not

contactable .

Driver Name:

The name of the driver shown on the LCD, in the Email reports and

on the web page heading .

Logging Email:

The Email address of the person who needs to receive status

emails from the driver unit .

DHCP:

Dynamic Host Configuration Protocol (DHCP). Turn this on to

allow the driver to get all the network configuration fields from the

DHCP server on the network when it starts up .

Submit and Restart:

Press this button if you have changed any of the network

parameters . It will save the settings and restart the driver to utilise

the new configuration.

Driver Status Email Configuration

Use this section to enable and configure the Email reporting features of the driver.

Power Cycle Logging:

The driver sends an Email every time the software restarts .

This can be caused by a power cycle, a user reset request or a

software error .

Error Condition Logging:

This causes the driver to send an Email whenever an error occurs

nterval Logging:

This causes an Email to be sent on a regular interval basis .

Driver save and restore configuration

This section allows the complete configuration of the driver, to be saved to an XML file on the

browsing device. This XML file can then be loaded into a driver which will set the parameters up

exactly as the unit from which the configuration file was saved.

Right Click on this link and save to a location on your device: - Right click and select “Save link

as” . This will bring up a dialogue box for you to save

Choose File:

Clicking this button will allow you to navigate to the location of the

XML file that you want to load into the driver.

Содержание d series
















































Результаты поиска

Содержание d series

Отзывы:

Похожие инструкции для d series

Бренды по названию

Популярные бренды

Ampetronic d series, Инструкция по установке и эксплуатации

Результаты поиска

Содержание d series

Отзывы:

Похожие инструкции для d series

Бренды по названию

Популярные бренды