Ampetronic d series, Инструкция по установке и эксплуатации

Страница: 23 / 48

Ampetronic D Series Installation Handbook & User Guide Page 21
The title of the web page is always DXX-X (XXXXXXXXXXXXXXX) where XXXXXXXXXXXXXXX
is the driver name . At the bottom of the screen are the meters for the level of compression and the
current in loops A and B (if present).
The lines on the bar graphs indicate 6dB separation . It should be noted that the settings displayed
on the settings tab of the web page are updated once a second . Thus if someone changes a value
from the front panel or via another web connection, these changes will be shown on the web page
as they happen .
Settings Tab
The settings tab allows control of the most important settings of the driver . The items on this page
are sliders and drop down boxes . In order that the slider settings cannot be changed by a large
amount accidentally, the clicking on a slider track to set a value is disabled .
To alter a value it is necessary to click on the slider handle and move it . The value is not sent to the
Compression
Current A
Current B
D14-2 (Departure Lounge)
Settings
Status
Driver Config
Test Signal Freq: 1000 Hz
Test Signal:
OFF
Current (dB) -9
Current Offset 0
Chan. B (dB)
Phase Shift ON
MLC MLC Off
Custom MLC LF 1
Slope (+dB/Oct):
Custom MLC Knee 1600 Hz
Freq:
Custom MLC HF
1
Slope (+dB/Oct):
Input Gain 1 (dB) -6
Input 1 Mode
Line
Input Gain 2 (dB) -80
Input 2 Mode Microphone
Copyright Ampetronic © 2015