Amigo MicroModem, Руководство по установке

Страница: 33 / 37

33
Result Codes:
OK
if n = 8000
ERROR Otherwise
Command options:
#VSR?
Return the current setting
#VSR=? Return the message, “8000”
#VSR=8000 Set the sample rate to 8000
#VSS - Silence Sensitivity Tuner (Voice Receive)
This command set the sensitivity in Voice Receive Mode silence detection.
Parameters:
n = 0 - 3
Default: 2
Result Codes:
OK if n = 0 -3
ERROR Otherwise
Command options:
#VSS?
Return current setting
#VSS=? Return the message, “0-3”
#VSS=0 Disable silence detection by the modem in Voice Receive Mode
#VSS=1 Least sensitive setting
#VSS=2 Medium sensitive setting
#VSS=3 Most sensitive setting
#VTD - Tone Reporting Capability
This command sets which types of tones can be detected and reported to the DTE via
shielded codes in Voice Transmit, Voice Receive, and Online Voice Command Modes.
Parameters:
i, j, k
Default: 3F, 3F, 3F
Result Codes:
OK if setting are supported by the modem.
ERROR Otherwise
Command options:
#VTD? Return
current setting
#VTD=? Returns the tone reporting capabilities of the modem.
#VTD=i,j,k Where i, j, k corresponds to the desired capabilities (see table
below), i for Voice Transmit, j for Voice Receive, and k for Online Voice Command
Modes.