Amigo MicroModem, Руководство по установке

Страница: 32 / 37

32
being told to stop sending data by the modem, before the modem voice transmit buffer
overflows.
Parameters:
n = 0 - 255
Default: 255
Result Code:
OK if n = 0 - 255
ERROR Otherwise
Command options:
#VSK?
Return the current setting
#VSK=? Return the message, “0-255”
#VSK=n Set the skid buffer size to n bytes
#VSP - Silence Detection Period (Voice Receive)
This command sets the Voice Receive Mode silence detection period value. If the modem
does not receive any ADPCM data after the timer expired, it will cause the modem to
send <DLE>s or <DLE>q codes.
Parameters:
n = 0 - 255 (0 - 25.5 seconds)
Default: 55
Result Code:
OK if n = 0 - 255
ERROR Otherwise
Command options:
#VSP?
Return current setting
#VSP=? Return the message, “0-255”
#VSP=0 Disable the silence period detection timer
#VSP=n timer = n * 0.1 second
#VSR
- Sampling Rate Selection
This command sets the audio codec sampling rate.
Parameters:
n = 8000 (8000 Hz sampling rate)
Default: 8000