Amigo MicroModem, Руководство по установке

Страница: 28 / 37

28
#REV? - Request Revision Level
This command request the revision number of PCtel Driver.
#REV? “PCtel 2.00”
#RG - Record Gain Control
This command sets the record gain.
Parameters:
n = 0000 - 7FFF
Default: 7FFF
Result Codes:
OK if n = 0000 - 7FFF
ERROR Otherwise
Command options:
#RG? Return the current setting
#RG=? Return the message, “0000-7FFF”
#RG=n Set the record gain to n
#SPK - Change the setting of Speakerphone
This command set the parameters for speakerphone.
Parameters:
#SPK=<mute>, <spk>, <mic>
<mute> Microphone state
0 Microphone mute
1 Microphone on (default)
2 Room Monitor mode (mic on max. AGC, speaker off)
<spk> Speaker Output Level
Range: 0 to 15 (speaker attenuation in 2 dB steps)
Default: 5 (10 dB attenuation)
Speaker mute is achieve by a value of 16
<mic> Microphone Gain Parameter
0 0 dB
1 6 dB gain (default)
2 9.5 dB gain
3 12 dB gain
Command options:
It is not necessary to enter all three parameters,
#SPK=,<spk>,<mic>
#SPK=,,<mic>
#TL - Transmit Level Control
This command sets the transmit level.
Parameters:
n = 0000 - 7FFF
Default: 3FFF