Amigo MicroModem, Руководство по установке

Страница: 25 / 37

25
Code Sent to
Modem
Meaning
<DLE><ETX> Terminate
Sent during Voice Transmit Mode to indicate that the DTE has finished
transmitting a voice message. The Modem complete transmission of any
remaining data in the voice transmit buffer before responding with the VCON
message and entering Online Voice Command Mode.
<DLE><CAN>
Cancel
Sent during Voice Transmit Mode to indicate that the DTE has finished
transmitting a voice message and wants the modem to discard any remaining
data in the voice transmit buffer. The modem immediately purges its buffer, and
then responds with VCON message entering Online Voice Command Mode.
<DLE>p Pause
Sent during Voice Transmit Mode to force the modem to suspend sending voice
data to the selected output device. Any data currently in the voice transmit buffer
is saved until either a resume (<DLE>r), or cancel (<DLE><CAN>), is received,
in which case the data is lost. If a <DLE><ETX> is received during the paused
state, the modem processes it normally, and also automatically resumes
transmission of the data left in the buffer (appended with <DLE><ETX>). Any
other data received from the DTE while in this paused state is placed in the
transmit buffer according to available space, with flow control active.
<DLE>r Resume
Sent during Voice Transmit Mode to force the modem to resume sending voice
data to the selected output device. Any data currently in the voice transmit buffer
is now played.
Table 2