Amigo MicroModem, Руководство по установке

Страница: 22 / 37

22
86 Call failure reason code
0 - Normal disconnect; no error
4 - Loss of carrier
5 - V.42 negotiation failed to detect an error correction modem at remote end
6 - No response to complete negotiation
9 - No common protocol
12 - Remote initiated a normal disconnect
13 - Remote modem did not respond after 10 message retransmissions
14 - Protocol violation
15 - Compression Failure
20 - Hang up by inactivity time out
91 Transmit level
Set the transmit level in -dBm
Range: 0 - 15 (-dBm)
Default:
11 (-11 dBm)
Table 6. FAX Class 1 Command Set
Command Function
+FCLASS=0 Select data mode
+FCLASS=1 Select facsimile Class 1 mode
+FAE? Report active adaptive answer setting: 0 for disabled, 1 for enabled
+FAE=? Report adaptive answer capability
+FAE=0 Disable adaptive answer
+FAE=1 Enable adaptive answer
+FCLASS=? Report service classes supported
+FTS=n Stop transmission and pause, 0-255 in 10 ms
+FRS=n Wait for silence, 0-255 in 10 ms
+FTM=? Report Class 1 transmit capabilities
+FRM=? Report Class 1 receive capabilities
+FTH=n Transmit data with carrier n, n = 3, 24, 48, 72, 73, 74, 96, 97, 98, 121, 122, 145, 146
+FRH=n Receive data with carrier n, n = 3, 24, 48, 72, 73, 74, 96, 97, 98, 121, 122, 145, 146