Amigo MicroModem, Руководство по установке

Страница: 26 / 37

26
AT Voice Command Description
ATA - Answering in Voice
This command works similarly to the way it works in Data and Fax Modes.
Result Code:
VCON
ATD - Dial Command in Voice
This command will perform the dial action in Voice Mode.
Result Codes:
VCON Issued in Voice Mode when the modem determines that the remote modem or
handset has gone off-hook.
NO ANSWER Issues in Voice Mode when the modem determines that the remote has not
picked up the line before the S7 timer expires.
ATH - Hang Up in Voice
This command works the same as in Data and Fax modes by hanging up the phone line.
1. This command forces the #CLS=0, but does not destroy any of the voice parameter
setting such as #VBS, #VSP, etc.
2. The #BDR setting is forced back to 0.
ATZ
- Reset from Voice Mode
This command works the same as in Data and Fax modes. In addition, it will also resets
all voice related parameters to default states, forces the #BDR=0 condition, and forces the
telephone line to be selected with the handset on-hook.
#BDR - Select Baud Rate (Turn Off Autobaud)
This command selects a specific DTE/modem baud rate.
Parameters: n = 0 - 48 (Baud Rate = n * 2400 bps)
Default: 0
Result Codes:
OK if n is between 0 and 48
ERROR Otherwise
Command options:
#BDR? Return the current setting
#BDR=? Return a message indicating the speeds that are supported
#BDR=0 Enable autobaud detection on the DTE interface
#BDR=n Select the baud rate