Amigo MicroModem, Руководство по установке

Страница: 2 / 37

2
Section 1
1.0 Introduction
This document provides reference information for the evaluation testing of an external USB modem based
on
Host Signal Processing Data/Fax Modem Technology. The evaluation HSP USB Modem™ eliminates
the redundant hardware parts found in most modems today. These include the data pump, a controller, an
additional UART and external memory as required in a conventional approach. In addition, the complete
HSP solution allows an external modem to be upgraded with enhancements and features through software
upgrades rather than a chip change or board swap.
1.1 System Requirements
„
Pentium 200 MHz MMX Pentium
„
AMD K6 200 MHz +
„
Cyrix 6x86MX PR200 +
„
16MB RAM
„
Usb port Windows 98 Windows 2000
1.2 Features
DATA
Supported Communication Standards
* V.90, V.34, V.32bis, V.32, V.22bis, V.22, V.21, V.23, Bell212A, Bell 103
Data Compression Error Correction
V.42bis V.42 LAPM
MNP 5 MNP 2,3,4
FAX
Supported Protocols Operating System Compatibility
Group3 T.4 fax, Windows 98
V.17, V.29, V.27ter, V.21 Channel 2 Windows 2000
EIA-578 Fax Class 1
General Features
AT Commands
Auto Fallback
Caller ID
Data/Fax
High throughput Virtual UART, DTE rate up to 115,200
Universal Serial Bus interface
Low power consumption
Signal Quality Monitoring and Auto Retrain
Windows is a registered trademark of Microsoft Corp.