Amigo MicroModem, Руководство по установке

Страница: 14 / 37

14
% Percent Commands
%A Default is set to each country’s encoding law. For example, for USA %A is 0, for Germany
%A is 1.
%A0 Mu law encoding
%A1 A law encoding
%C0 Disable data compression
%C1 Enable MNP5 compression
%C2 Enable V.42bis compression
%C3 Enable both V.42bis and MNP5
%E0 Disable auto-retrain
%E1 Enable auto-retrain
%E2 Enable auto-retrain and fallback
%E3 Enable auto-retrain and fast hang up
%L Report received signal level in -dBm
%N0
%N1
%N2
%N3
%N4
%N5
%N6
%N7
%N8
%N9
Dynamic CPU loading disabled
Dynamic CPU loading not to exceed 10%
Dynamic CPU loading not to exceed 20%
Dynamic CPU loading not to exceed 30%
Dynamic CPU loading not to exceed 40%
Dynamic CPU loading not to exceed 50%
Dynamic CPU loading not to exceed 60%
Dynamic CPU loading not to exceed 70%
Dynamic CPU loading not to exceed 80%
Dynamic CPU loading not to exceed 90%
%Q Report line signal quality
\ Backslash Commands
\A0 64-character max. MNP block size
\A1 128-character max. MNP block size
\A2 192-character max. MNP block size
\A3 256-character max. MNP block size
\Bn In non-error correction mode, transmit break in 100 ms units (1-9 with default 3)
\G0 Disable XON/XOFF flow control (modem to modem)
\G1 Enable XON/XOFF flow control (modem to modem)
\Kn Define break type (refer to table 2)
\L0 Use stream mode for MNP
\L1 Use interactive block mode for MNP
\N0 Normal mode; speed control without error correction
\N1 Plain mode; no speed control and no error correction
\N2 Reliable mode
\N3 Auto-reliable mode
\N4 LAPM error correction only
\N5 MNP error correction only