Amico ice 30m, Инструкция по установке и эксплуатации

Страница: 55 / 57

www.amico.com 55
Electromagnetic Compliance Data for iCE 30m Series
Recommended Separation Distances Between Portable and Mobile RF
Communications Equipment and the Equipment or System
The equipment or system is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or user of the equipment or system can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and
the equipment or system as recommended below, according to the maximum output power of the communications
equipment.
Rated maximum output
power of transmitter
W
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz 80 MHz to 800 MHz 800 MHz to 2.5 GHz
d=1.2√P d=1.2√P d=2.3√P
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.73
1 1.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23
For transmitters rated at a maximum output power not listed above, the recommended separation distance ( d ) in
metres ( m ) can be estimated using the equation applicable to the frequency of the transmitter, where ( P) is the
maximum output power rating of the transmitter in watts ( W ) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
Disposal
1. The surgical lamp doesn’t contain any dangerous goods.
2. The components of the surgical lamp should be properly disposed of at the end of its shelf-life.
3. Make sure that the materials are carefully separated.
4. The electrical conducting boards should be submitted to an appropriate recycling facility.
5. The rest of the components should be disposed of in methods applicable to the contained materials.