Amico ice 30m, Инструкция по установке и эксплуатации

Страница: 49 / 57

www.amico.com 49
Maintenance: Amico iCE 30m LED Lights
1. Amico iCE Series LED Lights are supplied with brakes on the suspension fixture and on the lamp housing. If
necessary, adjust these brakes after installation.
2. If the lamp is difficult to move, or if it does not keep its position, the brake forces needs to be adjusted.
3. Preventive maintenance of the light should be done every two years. This includes a technical and mechanical
check-up.
4. In order to keep the system working properly throughout its lifespan, we recommend that the hinges should be
greased once a year with acid-free grease.
5. When adjusting the brakes, please refer to Installing the Central Axis Arms on pages 19-21 .
6.
!
Before dismounting the lamp, set the height adjustment of the spring arm to the horizontal position.
Bi-annual inspection (to be completed by qualified technicians):
1. The spring arm and lighthead moves smoothly without any noise or grinding.
2. Locking key thickness must not be less than 0.060" (1.52 mm) thick and 0.250" (6.35 mm) deep at any point.
3. Ensure that the spring arm does not have any cracks or damage to the paint or plastic covers.
4. The spring arm should not drift when loaded.
5. Lubricate the moving joints with approved grease.
Maintenance: Spring Arm