S-4001 ISBH+I SM 30°
1-4
Released: 09/2017
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
A - INTRODUCTION
4. TECHNICAL CONDITIONS
Machine type
S 4001 ISBH+I 30°
Description
Electronic controller chains stitch straight buttonhole machine for sewing
imitation buttonholes on cuff Wiggins. With the automatic indexer, preset
programs automatically control the sewing of multiple buttonholes either
straight or on an angle
Sewing speed
1500-3800 stitches/min (500 - 1900 rev/min of the drive shaft)
Buttonhole length
15.8 - 25 mm (5/8” - 1”)
Stitch density
3 - 12 stitches/cm (8 - 35 spi)
Type of the buttonhole
Single thread chain stitch without center cutting
Machine clamp foot height
12.7 mm (1/2”)
Maximum work thickness
to 3 mm (1/8”)
Bite range
1.7 - 2.3 (1/15” - 3/32”)
Distance between the first
and the second row of
stitches
0 - 0.9 mm
Recommended thread
Thread size 80, 100, 120
Needle system
Needle 750 SC 90/14 (it is possible to order 80/12; 70/10)
Lubrication
Semi-automatic
Operating Conditions
According to IEC 364-3, IEC 364-5-51 temperature from +5°C to 40°C,
relative air humidity from 30 to 80 %
Air pressure
0.55 MPa (80 PSI) Indexer 0,4 Mpa (58 PSI)
Machine db level
Laeg = 74dB; LWA = 87dB; LpC, peak = 103dB
Machine head dimension
340 mm (height) x 470 (width) x 250 mm (length)
Machine head weight
62 kg
Table Dimension
700 mm (height) x 600 mm (width) x 1100 mm (length)
Electrical Requirements
1NPE~60Hz 230V/TN-S (according to EN 60204-1)
1NPE~50Hz 230V/TN-S (according to EN 60204-1)
Line Circuit Breaker
10A characteristic C (according to EN 60947-2)
16A characteristic B (according to EN 60947-2)
Indexer number of buttonholes
1 — 8
Distance between buttonholes
4 — 73 mm
Max. indexer feeding
87 — 102 mm according to the set angle
Angle setting
0° — 30°