S-4000 BH Omron
1-55
Released 05/2010
e-mail: [email protected]; [email protected]; website: www.amfreece.com
Phone: +420 582 309 286; Fax: +420 582 360 606
F - MACHINE MAINTENANCE
9.
Knife maintenance
Inspect the knife and cut, if the knife is bent, damaged, or dull, replace or sharpen as needed.
To change:
a)
loosen the screw
and remove the knife
b)
replace or sharpen the knife
c)
insert the new knife into the slot
and move it fully up to the
stop
. Tighten the knife holder screw
. Installation is correct
when the knife size number is facing the operator. If incorrect,
reverse the knife.
d)
disconnect the air supply and ensure the knife blade goes
through the slot in the center of the throat plate. Connect the air
supply.
10.
When the maintenance and checking are finished, insert the clamp feet mechanism into the machine.
2 . P E R I O D I C M A I N T E N A N C E
once a day
(8 hours of operation)
- cleaning of the sewing mechanism area and inner frame of the
- machine
- lubrication of mechanisms - see area F4.
once a week
(40 hours of operation)
- visual check - external and internal mechanisms
- fill oil into reservoir with oil level indicator, or sooner if required
once a month
(160 hours of operation)
- check of the clearance in sewing mechanism drive
- check of the screw connections tightening (obtain values below)
- check of condensate in regulator
- check of dirty of cleaning pads in control box
Recommended values for screws tightening ( N m ) :
M3
0,5
0,6
0,8
M4
1,2
1,5
2,0
M5
2,5
3,0
4,0
M6
4,0
5,0
7,0
M8
8,0
16,0
M10
10,0
30,0
Содержание S-4000 BH Omron
Страница 4: ......