Released 06/2010
E-mail: [email protected]; [email protected]; website: www.amfreece.com
Phone: +420 582 309 286; Fax: +420 582 360 606
DECO 2000
1-54
2. M A C H I N E C L E A N I N G A N D M A I N T E N A N C E
1. Switch off the electrical power supply.
2. Use the brushes from the accessories to clean the thread lints and fabric from the sewing mecha
nism.
Turn the handwheel to rotate with the sewing mechanism. Clean the thread waste from the roller
daily. Lift the working table and perform the cleaning by the air-blowing.
Do not forget to clean the waste on the control box air gird.
W A R N I N G !
When covering the working table take care of hands. Possible injury!
3. Lubricate the machine daily
4. Perform visual check of mechanism especially in area of sewing mechanism.
5. When the maintenance and checking is finished, close covers.
3. M A C H I N E L U B R I C AT I O N
1. It is necessary to lubricate daily all places said below, lubricate soundly especially when the
machine is switched on for the first time or after a long idle period. Use the oil
ESSO TERESSO 68
or oil with similar quality.
2. Too much oil may cause its overflowing around the needle bar area.
3. To lubricate the needle bar fold the needle bar cover. Few drops of oil drop on the needle bar above
bearing , to the needle bar center, and do not forget to lubricate the lower needle bar and conducting
sleeve area.
Close the cover.
F - MACHINE MAINTENANCE