manualshive.com logo in svg

AMF DECO 2000, Руководство по эксплуатации и ремонту, Страница: 30 / 74

Поделиться
Скачать
AMF DECO 2000 Скачать руководство пользователя страница 30

Released 06/2010

E-mail: [email protected]; [email protected]; website: www.amfreece.com

Phone: +420 582 309 286; Fax: +420 582 360 606

DECO 2000

1-18

C MACHINE CONTROLS

UP

SPEED         310

-

+

READY

STANDARD STITCH

EDIT

500

150

<<

>>

STYLE

EDIT

DENSE

STANDARD STITCH

OK

t

<<

>>

STYLE

EDIT

DENSE

STANDARD STITCH

OK

t

OK

40

50

15

0

2

3

4

5

30

35

50

0

402

ENT

CRL

1

0

2

3

6

4

5

7

8

9

7.1   To select the condensed stitch parameters press 

EDIT

 button on the main screen.

7.

CONDENSED STITCH

7.2  Press ‘DENSE’ on the new screen. This function is password protected if the “Condense Stitch Kit

 (Part no. 03.5570.0.013)” is ordered separately. To activate this function press the button and enter

 the password supplied along with the Dense Kit.

7.3   A numeric screen would be displayed. Enter the 3 digit password value supplied along with the

       ‘Condensed Stitch Kit’.

NOTE: 

 If the machine is lying unused and not powered continuously for more than a week to 10 days,

the password may be lost and would need to be entered again to activate the “Condensed Stitch

Parameter” again.

Содержание DECO 2000











































































Отзывы:

Нет отзывов