Released 06/2010
E-mail: [email protected]; [email protected]; website: www.amfreece.com
Phone: +420 582 309 286; Fax: +420 582 360 606
DECO 2000
1-21
C MACHINE CONTROLS
9. S T A R T I N G S E W I N G
Ensure that all set parameters concur with requirements. The machine is activated by one pedal (A),
but it is possible to order the machine with two pedals (B).
A
B
0
1
2
3
A -
one pedal
1. If the machine is not in the home position with the needle up, press
the foot pedal
Ê
in position
1
or the
UP
button on the left corner of
the main screen
2. Move the knee lever
Ë
to the right. The foot will raise and you can
place the material.
3. Press the foot pedal
Ê
to the position
2
and start sewing with slow
speed svitable for beginning of sewing if you press the pedal to the
position
3
, you will reach maximal adjusted speed.
B -
by two pedals
1. If the machine is not in the home position, press the right foot pedal
Ì
or the
UP
button
on the left
corner of the main screen.
2. Raise the presser foot by moving the knee lever
Ë
to the right.
Place the material under the foot
and release the knee lift.
3. Press the left foot pedal
Í
to start sewing. This pedal has two positions. By pressing the pedal to
the first position the sewing speed is slow used especially at the start of sewing. To reach the
maximum set sewing speed press the foot pedal fully.