Released 06/2010
E-mail: [email protected]; [email protected]; website: www.amfreece.com
Phone: +420 582 309 286; Fax: +420 582 360 606
DECO 2000
1-52
1 5. B E LT T E N S I O N A D J U S T M E N T S
The V belt can be released after some time of using the machine, which may worsen the
productivity. That is why its necessary to check the belt tension.
1.
To tighten the V belt fold the machine working table and loosen two nuts 06000014 and two screws
0400004.
2.
Move the bracket down as needed and tighten two nuts.
3.
After the V belt is adjusted it is necessary to adjust the T belt: Loosen the nuts, move the motor
down as needed and then tighten the screws.
4.
Check the tension by the pressure approximately 10 N above the plate.
The sag of the belt should be approximately 10 mm.
5.
To tighten the belt on the step motor 24381054 loosen the screw on the step motor holder
31000006 and move the holder with step motor in direction away from the machine.
Tighten the screw.
E - STANDARD MACHINE ADJUSTMENT