Released 06/2010
E-mail: [email protected]; [email protected]; website: www.amfreece.com
Phone: +420 582 309 286; Fax: +420 582 360 606
DECO 2000
1-2
A - INTRODUCTION
2 . B A S I C I N F O R M AT I O N S
The sewing machine Deco 2000 is designed and produced to be very reliable. Important design goals have been
to provide a safe machine that is simple and inexpensive to maintain.
Special electronic and mechanical safety devices protect the operator and the machine. There is a special
power lock out switch that permits the machine to be locked in the off position, so that it cannot be cycled
accidentally. The drive cover is equipped with a safety switch that will not allow machine operation while
the cover is open. There is an emergency off switch. There are safety - warning labels on the machine in all
areas that require special care. These must not be removed. If they are lost replace them immediately.
Never remove safety mechanisms or labels. Said precautions can not include all safety devices, so it is
necessary for the operator before the machine is used, to read and understand to this manual. It will
eliminate the mistakes during the installation, and during the operation as well. Do not start the machine
if you did not read all instructions delivered with the machine and if you do not understand all functions and
procedures.
In this manual are incorporated three category of safety instructions :
DANGER! Possible loss of life.
WARNING! Possible serious injury or machine damage.
NOTICE! Possible injury or machine damage.
It is recommend that service workers from AMF Reece oversee the installation and initial training of your
mechanics and operators.
The most effective safety precaution is a well-managed safety program. Be sure those who use this machine
are properly trained. Never disable safety equipment.
Always wear safety goggles when operating or servicing the machine.