Released 06/2010
E-mail: [email protected]; [email protected]; website: www.amfreece.com
Phone: +420 582 309 286; Fax: +420 582 360 606
DECO 2000
1-23
11. S W I T C H O F F T H E M A C H I N E
The machine can be stopped by the black
STOP
button at any time during sewing. Use this
button in case of possible injury or machine damage. The button is located on the left side of the
machine frame. The machine stops immediately when the Stop button is pressed. The error mes
sages appears on the screen.
Always remove the power supply to change the needle or make any other machine maintenance.
To sew again, press the green
START
button. The main menu
➊
appears on the screen.
Emergency stop:
C A U T I O N !
If the
OK
button
➌
is pressed on the error screen, the display screen appears
a) To continue the sewing cycle press the foot pedal. (Left foot pedal, if the machine is equiped with
two padals)
b) To start a new sewing cycle bring the needle up by pressing the
UP
button
Ë
Ë
Ë
Ë
Ë
on the display
or by the right foot pedal. Press the left foot pedal to start sewing cycle from the beginning.
S t a n d a r d s t o p :
C A U T I O N !
C MACHINE CONTROLS
OK
UP
SPEED 310
-
+
READY
STYLE STITCH 1
EDIT
500
150
UP
SPEED 310
-
+
ERROR
STANDARD STITCH
EDIT
500
150
Press the
Error
button
and the error message screen appears on the display again . Press the green
START
button.
The main menu
➊
appears on the screen. Then continue the procedure as in case a) or b).
1. Release the left foot pedal, and the machine will stop sewing.
Before turning off the machine make sure that the needle is up. If it is not in up position press the
UP
button
on the main screen or press the right foot pedal.
2. Press the black
STOP
button on the left side of the machine frame.
3. To switch off the machine turn the main switch to the off position 0.