25
User Manual
_________________________________________________________
© 2020 AMETEK Electronic Systems Protection / Technical Support: 1-800-645-9721 / ametekesp.com
6.0 LCD SETTING
There are three parameters to set up the UPS. Refer to following
diagram.
Parameter 1
Parameter 2
Parameter 1: Program alternatives.
Refer to below table.
Parameter 2: iSetting values for each
program.
15 Programs Available List for Parameter 1:
Code Description
Bypass
AC
ECO
CVCF
Battery
01
Output voltage
Y
02
Output frequency
Y
03
Voltage range for bypass
Y
04
Frequency range for bypass
Y
05
ECO mode enable/disable
Y
06
Voltage range for ECO mode
Y
07
ECO mode frequency range
setting
Y
08
Bypass mode setting
Y
Y
Battery
Test
09
Battery backup time setting
Y
Y
Y
Y
Y
Y
10
Reserved
Reserved for future
11
Reserved
Reserved for future
12
Hot standby function enable/
disable
Y
Y
Y
Y
Y
Y
13
Battery voltage adjustment
Y
Y
Y
Y
Y
Y
14
Charger voltage adjustment
Y
Y
Y
Y
Y
Y
15
Inverter voltage adjustment
Y
Y
Y
16
Output voltage calibration
Y
Y
Y
17
Charging current setting
Y
Y
Y
Y
Y
Y
*Y means that this program can be set in this mode.
