Ametek Jofra ETC-125 A, Справочное руководство

Страница: 60 / 86

123943 08 2019-04-12 33
4.7 Simulation/training

Hold down the and buttons while you switch
on the calibrator.
The instrument will display the following screen:
The instrument will then revert to the standard display.
The calibrator’s simulation mode is used to train personnel in the use
of the instrument, etc. The simulation setting differs from the
standard setting as follows:
•
The instrument will not actually heat up or cool down the well.
•
The heating and cooling processes are simulated at around 10
times the normal speed of these operations.
The calibrator will remain in simulation mode until it is switched off.
AUTO
STEP