Ametek Chandler Engineering 4207D, Руководство по эксплуатации

Страница: 11 / 47

SECTION 2 – OPERATING INSTRUCTIONS 2-1
Section 2 - Operating Instructions
Before operating the 4207D it is necessary to be familiar with the press controller and load
indicator features and controls.
Programming the Controller
The Model 7052 controller used with the 4207D system features user defined segment
programming (8 segments maximum). Using these segments, sample load ramp and dwell
segments are defined.
Controller Feature Description of Feature
Output 1 or 2 : Not active.
Upper Readout
(Process Value) Displays the current value of the sample load. This
value must be multiplied by 10 to indicate pounds-
force (Lbf).
Lower Readout or
(Setpoint Value)
Indicates the current set point value. Indicates alarm
condition in the event of an alarm.
Remote Communication Indicates remote communication if the system is
equipped with this option.
Auto/Manual Button Changes the mode of the controller from Automatic
to Manual. When the controller is not being used,
place the controller in Manual mode and verify that
the lower readout displays
Off.
Run/Hold Button Used to Run, Hold, or Terminate a program. Press
once to Run the program. Press again to Hold the
program. Press for over 3 seconds to terminate the
program.
Page Button Used to page through the various menus in the
controller.
Scroll Button : Used to scroll through the parameter settings within a
menu page.
Up/Down Buttons : Used to change the value of a parameter. Press and
hold the button for rapid changes to a value.
Setpoint 2
Not used