Ametek Chandler Engineering 4207D, Руководство по эксплуатации

Страница: 32 / 47

2 CONTROLLER CONFIGURATION
Model 4207D Controller Configuration Parameters
Parameter Description Status Value
RUN Program Run List Hide
PROG Program Edit List Altr
Hb Holdback type Hide OFF
Hb.U Holdback units Hide 0
rmP.U Ramp units Hide min
dwL.U Dwell units Hide min
CYC.n Number of program
cycles Hide 1
SEG.n Segment number varies depending on segment
being configured
TYPE Segment type varies depending on segment
being configured
AL
Alarm List Altr
4rat Alarm 4 rate limit alarm Altr 6000 (may require adjustment
during final system testing)
HY4 Alarm 4 hysteresis Hide 1
Lbt Off
diAG
Enable diagnostic
alarms Hide no
ATUN Autotune List Hide
PID PID List Hide
GSP Not used
SET PID1 or PID2 PID1
PB Prop. Band 5000
TI Int. Time 3
TD Der. Time OFF
RES Manual Reset 0
HCB Cutback High Auto
LCB Cutback Low Auto
REL.C Rel. Cool Gain 1.0
SP Setpoint List Hide
SSEL Setpoint Select SP1
SP 1 Setpoint 1 value 0
SP 2 not used not used
SP L SP1 low limit 0
SP H SP1 high limit 5000
SP2 L not used not used
SP2 H not used not used
SPrr Ramp rate value Off
Hb.ty Holdback type Off
IP
Input List Hide
Fil.t Filter time constant 5.0