background image

iv

3050-AP Moisture Analyzer

WARRANTY AND CLAIMS

We warrant that any equipment of our own manufacture or manufactured for us pursuant to our 

specifications which shall not be, at the time of shipment thereof by or for us, free from defects in mate-

rial or workmanship under normal use and service will be repaired or replaced (at our option) by us 

free of charge, provided that written notice of such defect is received by us within twelve (12) months 

from date of shipment of portable analyzers or within eighteen (18) months from date of shipment or 

twelve (12) months from date of installation of permanent equipment, whichever period is shorter. All 

equipment requiring repair or replacement under the warranty shall be returned to us at our factory, 

or at such other location as we may designate, transportation prepaid. Such returned equipment shall 

be examined by us and if it is found to be defective as a result of defective materials or workmanship, 

it shall be repaired or replaced as aforesaid. Our obligation does not include the cost of furnishing any 

labor in connection with the installation of such repaired or replaced equipment or parts thereof, nor 

does it include the responsibility or cost of transportation. In addition, instead of repairing or replacing 

the equipment returned to us as aforesaid, we may, at our option, take back the defective equipment, 

and refund in full settlement the purchase price thereof paid by Buyer. 

Process photometric analyzers, process moisture analyzers, and sampling systems are warranted to 

perform the intended measurement, only in the event that the customer has supplied, and AMETEK 

has accepted, valid sample stream composition data, process conditions, and electrical area classification 

prior to order acknowledgment.  The photometric light sources are warranted for ninety (90) days from 

date of shipment.  Resale items warranty is limited to the transferable portion of the original equipment 

manufacturer’s warranty to AMETEK.   If you are returning equipment from outside the United States, 

a statement should appear on the documentation accompanying the equipment being returned declar-

ing that the goods being returned for repair are American goods, the name of the firm who purchased 

the goods, and the shipment date.

The warranty shall not apply to any equipment (or part thereof) which has been tampered with or 

altered after leaving our control or which has been replaced by anyone except us, or which has been 

subject to misuse, neglect, abuse or improper use. Misuse or abuse of the equipment, or any part thereof, 

shall be construed to include, but shall not be limited to, damage by negligence, accident, fire or force 

of the elements. Improper use or misapplications shall be construed to include improper or inadequate 

protection against shock, vibration, high or low temperature, overpressure, excess voltage and the like, 

or operating the equipment with or in a corrosive, explosive or combustible medium, unless the equip-

ment is specifically designed for such service, or exposure to any other service or environment of greater 

severity than that for which the equipment was designed.

The warranty does not apply to used or secondhand equipment nor extend to anyone other than the 

original purchaser from us.

THIS WARRANTY IS GIVEN AND ACCEPTED IN LIEU OF ALL OTHER WARRANTIES, WHETHER 

EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION AND WARRANTIES OF FITNESS OR 

OF MERCHANTABILITY OTHER THAN AS EXPRESSLY SET FORTH HEREIN, AND OF ALL OTHER 

OBLIGATIONS OR LIABILITIES ON OUR PART. IN NO EVENT SHALL WE BE LIABLE UNDER THIS 

WARRANTY OR ANY OTHER PROVISION OF THIS AGREEMENT FOR ANY ANTICIPATED OR 

LOST PROFITS, INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, TIME CHANGES OR ANY 

OTHER LOSSES INCURRED BY THE ORIGINAL PURCHASER OR ANY THIRD PARTY IN CONNEC-

TION WITH THE PURCHASE, INSTALLATION, REPAIR OR OPERATION OF EQUIPMENT, OR ANY 

PART THEREOF COVERED BY THIS WARRANTY OR OTHERWISE. WE MAKE NO WARRANTY, 

EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF FITNESS OR 

OF MERCHANTABILITY, AS TO ANY OTHER MANUFACTURER’S EQUIPMENT, WHETHER SOLD 

SEPARATELY OR IN CONJUNCTION WITH EQUIPMENT OF OUR MANUFACTURE. WE DO NOT 

AUTHORIZE ANY REPRESENTATIVE OR OTHER PERSON TO ASSUME FOR US ANY LIABILITY IN 
CONNECTION WITH EQUIPMENT, OR ANY PART THEREOF, COVERED BY THIS WARRANTY.

Содержание 3050-AP















































Отзывы: