Ametek 3050-AP, Руководство пользователя

Страница: 43 / 46

5-1 Glossary of Terms
Chapter 5
Glossary of Terms
Annunciator Display A graphical representation of a panel annunciator on which alarm
status of 3050-AP results are displayed.
Address A decimal number that must be assigned to a Model 3050-AP, when
the host PC is communicating with multiple Model 3050-AP Mois-
ture Analyzers.
Alarm Output Relay contact, which opens to indicate a concentration alarm. The
alarm set points can be changed via the configurator software.
Appropriate Vent System Gas manifold designed to transport the gas exhausted from the
analyzer to a safe disposal.
Baud Rate The rate, in bits per second, at which serial communications take
place between the 3050-AP analyzer and the host PC.
Configuration A set of operating parameters that has been set up using the con-
figurator software for control of a single Model 3050-AP Moisture
Analyzer.
Configurator Software A Windows-based graphical user interface that provides a means for
communicating with a single Model 3050-AP Moisture Analyzer.
Contaminates Liquids, solids, or gases that cause deterioration of system perfor-
mance.
Contaminate Trap A small packed column designed to remove glycols and other
contaminates that may degrade the performance of the QCM sen-
sor.
Custom Display A display mode in which any combination of Trend, Tabular, Meter
or Annunciator displays may be combined and stored as a display
configuration under a unique file name. The display configuration
may be assigned to one of three buttons on the main tool bar, for
instantaneous activation of the custom display mode.
Data Valid Relay contact, which opens to indicate a verification is in process
or an alarm condition. The data valid contact opens on all alarms
and stays closed during normal functions and readings.
Device A single 3050-AP Moisture Analyzer, or an addressable I/O device,
such as an Optomux module.