Ametek 3050-AP, Руководство пользователя

Страница: 35 / 46

3-5
Parameter Setup

NOTE
3. Define System Parameter Settings using the Setup Tab. Refer to figure 3.4.

Gas List box allows the user to specify the sample gas stream being
analyzed.

Units List box allows the user to specify the unit of measure for data
output.
All values entered must be the same unit of measure as selected.

Process Pressure Used when dewpoint C or dewpoint F is selected as unit of mea-
sure.
Units List box allows the user to specify the unit of measure for pres-
sure input.
Fixed Check if a fixed input. Enter value
External Check if external input. Enter values for 4 mA and 20 mA points.
Figure 3.4. AMETEK 3050-AP Configurator - Setup Tab