Amersham Pharmacia Biotech AKTA P-920, Руководство пользователя

Страница: 48 / 48

Short instructions
The following short instructions are intended as a guide to
users who are fully familiar with the safety precautions and
operating instructions described in this manual. These short
instructions assume that the module is installed according to
the installation instructions.
Select OK ESC
P-920
0
1
TC information ab, Uppsala. Printed in Sweden by TK i Uppsala AB
1
Switch on the module
with the mains switch
on the rear panel.
2 A self-test is performed. The version number is shown
for two seconds.
3 The
main operating menu
is shown.
4 Set the flow rate.
5 Start the pump by setting it in
RUN
mode.
6 The
main operating menu
is shown.
7 Set concentration and gradient.
8 Start a gradient by setting the
Gradient Length
and
Gradient Target.
9 Stop the pump by setting it in
END
mode.
End 2.50ml/min
Run
Set Gradient Target
(0.0%B) 10.0
Set Gradient Length
(0.00min) 8.0
Set Conc./Gradient
(0.0%B) 10.0
Run 2.50ml/min
2.0MPa 0.0%B
End 2.50ml/min
Run
Set Flow Rate
(0.00ml/min) 2.5
End 0.00ml/min
0.00MPa 0.0%B
Pump P-920
<version no.>
Selftest
Please wait...
18-1125-54_ab.qxd 1998-10-29 16:45 Sida 42 (1,1)