Amersham Pharmacia Biotech AKTA P-920, Руководство пользователя

Страница: 39 / 48

B.2.6 Set pulse compensation mode
Sets the condition for pulse compensation.
1 Select sub menu
Setup Pulsecomp.
, press
OK
.
2 Select either
on
or
off
, press
OK
.
B.2.7 Set pressure offset
Allows pressure offset calibration.
1 Select sub menu
Setup Press Offset
, press
OK
.
2 A warning message is shown that the pressure must be zero in the
pressure transducer to perform the calibration.
3 Press
OK
to acknowledge or
Esc
to cancel. When acknowledged,
the display returns to
Setup Press Offset
.
4 Press
OK
to perform the calibration.
B.2.8 Setup language
Sets the language used in the display.
1 Select sub menu
Setup Language
and press
OK
.
2 Select the desired language.
GB = English
D = German
F
= French
E = Spanish
I = Italian
B.2.9 Setup unit number
The unit number is the identification the pump has on the UniNet-1
communication link. It should correspond to the number set in
UNICORN for the pump. The number should be set to 0 if one
pump is used. If more than one pump is used, they must all have
different identification numbers. Factory default setting=0.
1 Select sub menu
Setup Unit Number
, press
OK
.
2 Select unit number (0–25), press
OK
.
B.2.10 Setup display angle
Sets the display angle to compensate for different viewing heights.
1 Select main menu
Setup
, press
OK
.
2 Select sub menu
Set Display Angle
,
press
OK
.
3 Select display angle (
->\
Up,
->|
Mid or
->/
Down), press
OK
.
Set Display Angle
( ->|) ->\ ->| ->/
Setup Unit Number
(0)
Setup language
(GB) GB D E F I
Calib Press Offset
Please wait...
Calib Press Offset
(40)
Note! Zero pressure
when changing offset
Setup Press Offset
Setup Pulsecomp.
(on) on off
Pump P-920
User Manual 18-1125-54 Edition AB
33
Reference information
B
18-1125-54_ab.qxd 1998-10-22 12:49 Sida 33 (1,1)