5 //
28
Rave Stair Lift Manual | www.Ameriglide.com | 866-378-6648
20419 P/N: 630-00078 Rev E
INSTALLATION PROCEDURES
II. INSTALLATION PROCEDURES
A. DETERMINE OVERALL RAIL LENGTH (Only if track did not come pre-cut to length)
Step 1:
Determine any obstructions that will affect the position and length of the rail. These
may include walls, doors, hallway orientation, etc.
Step 2:
First, measure the overall length of the stairs from the nose at the top landing of the
stairs to the floor at the bottom (nose to floor measurement, e.g., 128
"
, see image below).
Step 3:
For a normal stairway where there is adequate space for a landing, add 7
"
to the nose
to floor measurement. This will provide enough rail length to allow the stair lift to be adjusted
so that the floor-to-seat height will be the same at both the top and bottom (e.g., 135
"
).
Step 4: If the top landing has restrictions (i.e., a wall or doorway), use the chart below to
determine the length of extension needed.
Step 5:
To cut the rail, use a standard 12
"
chop saw, with a blade designed to cut aluminum.
Do not cut rail inside the house (aluminum chips are very hard to remove from carpets).
Extension
7
"
9
"
11
"
13
"
3.9
"
5
"
6.1
"
7.2
"
Horizontal intrusion on top landing
Tip!
DO NOT cut the end of the rail that contains
the joint holes. Remove the charger strips
and wire harness before cutting.
Содержание RAVE
Страница 28: ...20419 P N 630 00078 Rev E ...
