24 //
28
Rave Stair Lift Manual | www.Ameriglide.com | 866-378-6648
20419 P/N: 630-00078 Rev E
STEP 24:
Make sure the wire-retainers aren’t in the gas strut,
then snap the gas strut onto the ball ends. You have to compress
the strut a little to fit both ends.
STEP 25:
Push the ends of the gas strut onto the ball-studs.
STEP 26:
Put the wire-retainers into both ends of the gas strut.
STEP 27:
Unfold the rail so it is straight.
STEP 28:
Position bottom bracket so there is about a
1
/
4
"
gap between
the shoulder bolt and the forward end of the slot.
STEP 29:
Tighten the two nuts with a
1
/
2
"
socket wrench, ref. tighten to
about 10
'
lb.
STEP 30:
Now begin the changes necessary for the Rave unit. The
changes are shown here on the bar chassis for clarity here.
Use a #2 (medium size) Phillips screwdriver to remove the screw
toward the up-side of the Rave side-plate.
STEP 31:
Use a
5
/
16
"
Allen wrench to remove the two large bolts that
hold the side-plate onto the Rave unit.
STEP 32:
Remove the side plate.
Step 24
Step 26
Step 29
Step 28
1/4
"
Gap
Step 30
Step 31
Step 32
Содержание RAVE
Страница 28: ...20419 P N 630 00078 Rev E ...
