5800 SE 78th St. Ocala, FL 34472
4
P: (800) 327-3015
AP20BCF200-3-XL Installation & Operations Manual
Basic Safety Information
Do not touch or operate the machine with damp or
wet feet and hands.
Do not insert screwdrivers, kitchen tools or other
items between the protections and the moving parts.
Before carrying out cleaning operations or routine
maintenance, disconnect the machine from the
power supply mains, switching the master switch off
and removing the plug.
If the power supply cable is damaged, it must be
replaced by a service provider or similarly qualified
staff, in order to avoid risks.
This unit must be equipped with a disconnection
device incorporated in the fixed connection in
compliance with local regulations.
When loading the machine, the use of kitchen gloves
is recommended in order to prevent burns on contact
with the hot trays and trolleys.
Use gloves suitable for trays and cold trolleys.
During cleaning operations, of the condenser in
particular, always wear protective gloves, safety
glasses and mask for the respiratory protection.
The core probe must only be used for the purpose for
which it has been designed: detect the temperature
at the center of the food stuffs to be blast chilled and/
or frozen.
It is prohibited to remove the protections and safety
devices in order to perform routine maintenance.
Do not block the ventilation openings of the unit and
of the structure in which it is positioned.
WARNING - Please read the entire
installation procedure before attempting
to install the unit. Failure to follow the
procedures listed in this manual may result
in voiding the warranty.
IMPORTANT - Due to the size and weight of
this equipment, a minimum of two people
are required to install this equipment safely.
All OSHA regulations must be followed
while on the job site.
• This manual is an integral part of the product, it
supplies all of the indications necessary for correct
installation, correct use and maintenance of the
machine.
• It is mandatory for the user to read this manual
carefully and always make reference to it. It must be
kept in a place that is known and accessible to the
authorized operators (installer, user, maintenance
technician)
• The blast chiller is intended for professional use and
therefore only qualified staff can use it
• The blast chiller is destined only for the use for which it
has been designed.
• The manufacturer declines all responsibility for any
damage caused by incorrect or unreasonable use, as
for example:
• improper use by untrained staff.
• modification or interventions that are not specific for
the model.
• use of non-original spare parts or that are not
specific for the model.
• failure to comply, even partial, with the instructions
in this manual.
• The manufacturer disclaims all responsibility for
problems related to an incorrect installation of the blast
chiller.
• The blast chiller must be installed by an authorized
service/install provider.
