Model 152 Smart Card Reader/Writer Operation Instructions
8182760 Revision G Copyright Axiohm 1998 All Rights Reserved
Page 1.7
Examples
In the following examples, the protocol envelope is shown in normal, unenhanced text; the OSB
is shown in
italics, device information (commands, device responses) is underlined; and TPDU
requests and responses are in bold. All values are in hex.
Note: The TLP-224 byte split is not shown in this example. If you are using the standard TLP-
224 (as opposed to TLP-224Turbo), be aware that each byte (except the ETX), is broken into 2
nibbles which are converted into the ASCII equivalent of HEX for transmission to the other side
of the link.
Table 18 - TLP-224 Reader Commands Example
Step
Host Command
Reader Response
Comments
1
60 01 39 58 03
60 15
00 39 36 31 30 33
30 2C 41 4D 43 20 4D 31
35 32 2C 56 31 2E 30 30
25 03
Version String request and
response
2
60 01 7F 1E 03
60 01
00 61 03
Warm Reset, reader
Acknowledges
3
60 02 01 01 62 03
60 02
00 01 63 03
Status Request, reply
shows Card Seated
4
60 03 01 01 04 67 03
60 02
00 05 67 03
Turn on Green LED,
reader Acknowledges
5
60 03 01 01 14 77 03
60 02
00 15 77 03
Turn on Red LED, reader
Acknowledges
6
60 03 01 01 10 73 03
60 02
00 11 73 03
Turn off Green LED,
reader Acknowledges
7
60 03 01 01 00 63 03
60 02
00 01 63 03
Turn off Red LED, reader
Acknowledges
8
60 02 43 00 21 03
60 01
00 61 03
Select Connector 0, reader
Acknowledges
9
60 02 54 02 34 03
60 01
00 61 03
Select Type 2 Memory
Card (SLE4404), reader
Acknowledges
10
60 01 23 42 03
60 0A
00 F0 00 00 03 00
02 00 00 00 00 00 00 00
00 00 00 9A 02
Request Configuration,
reader responds.
CTS and all Connectors
present, Model 0, Protocol
USI2, speed 9600,
