American Innovations APM4AM-SAT WS, Руководство по установке и настройке

Страница: 25 / 46

APM4AM-SAT WS Installation and Configuration Guide
19

Controller Rev:
The controller rev (revision) is the version
number of the firmware running on the controller board of the
unit. Firmware is a software program that enables hardware
components to communicate and function.

Radio Version:
This field does not apply to satellite units.

Radio ISN and Unit ISN:
Radio ISN (identification serial number)
refers to the satellite terminal, and Unit ISN refers to the unit.
Battery Information
Battery Information
shows current configuration settings in the fields
labeled
Battery Type
and
Date Installed
. The
Battery Volts
field shows
the voltage level of the battery at the time you started the UCT software.
Controller Clock
Controller Clock
shows the time currently used by the controller clock.
The controller clock displays time in 24-hour format as HH:MM to
indicate hours and minutes.
The controller clock is a time-of-day clock running inside the unit. It does
not keep track of the month or year and does not correct itself for
daylight savings time. The unit uses the controller clock as a basis for all
time-related operations. For example, the controller clock in conjunction
with the transmission schedule determines when and how often the unit
transmits data packets (health checks) to the website account.
Transmission Schedule
Transmission Schedule
shows current configuration settings in the
fields labeled
Transmit Time
and
Repeat Interval
.
A transmission schedule is a scheduled data transmission at regular time
intervals. The unit uses the transmission schedule to determine when and
how often the unit transmits a data packet to the website account. The
transmission schedule also serves as a health check by allowing you to
verify the input device, unit, and communication network is operating
properly and ready to transmit alarms if detected.
Channels
Channels
(Figure 2-4) shows current configuration settings in the fields
labeled
Alarms & Filters
and
Input
. The last input channel reading
displays in the
Current Read
and
Accumulator
fields.