American Innovations APM4AM-SAT WS, Руководство по установке и настройке

Страница: 38 / 46

32 Chapter 2. Configuration
2.
If the status message
Acknowledgement received from server
appears, communication has been established with the Bullhorn
website server.
3.
If the status message
Test Packet Return Transmission Failed
appears, communication has not been established with the server.
Click
Transmit
again to send another test packet. If
communication cannot be established after several attempts, call
Technical Support for assistance.
If the battery is low or unplugged, the message
Could not start
test packet transmission
displays. Use a voltmeter to check the
battery voltage. Also verify the battery is securely connected in the
battery connector on the controller board. For successful
operation, the battery voltage should be 12 volts or higher. If the
battery voltage is 10.8 volts or lower, replace the battery as soon as
possible to ensure uninterrupted service.
N
OTE
:
The controller board includes an activity indicator (LED),
which turns on when the unit turns on or when it transmits a test
packet or data packet.
Saving a Template
After completing all configuration settings for the unit currently
connected to your computer, use the following procedure to save
configuration settings in a new template.
1.
Click
Tools
>
Advanced
>
Template
>
Save to Template
to
display the
Save Template
window.
2.
Open a folder on your computer to store the template. Use the
down arrow in the
Save in
list box to navigate to the folder. If
needed, create a new folder using the
Create New Folder
icon.
3.
If you want to change the default file name of the template, type a
name for the template in the
File name
text box making sure to
use the “.bht” file extension. Click
Save
when you finish.