American Innovations APM4AM-SAT WS, Руководство по установке и настройке

Страница: 27 / 46

APM4AM-SAT WS Installation and Configuration Guide
21

Channel (Ch1 – Ch6):
The
Channel
column includes 6 buttons
labeled
Ch1
through
Ch6
(channels 1 through 6). These buttons
correspond to an input channel on the unit with the same name.
Clicking a button displays the configuration window for that input
channel. Use the configuration window to enable or disable the
input channel and configure input channel settings.

Alarms & Filters:
This column identifies which input channels are
setup to transmit alarms and if any input channels are setup with
optional filter settings. If an input channel is not setup to transmit
alarms, the alarm field for that input channel is empty.
Depending on the alarm and filter settings configured for an input
channel, any of the following labels may display in the
Alarms &
Filters
column:
•
HI, HI Rpt, LO, LO Rpt:
These alarm labels are abbreviations
for high, high repeat, low, and low repeat, respectively. When an
input channel includes alarm settings, these alarm labels display
in the alarm field.
HI
displays in the top window of the alarm field when the alarm
setting
Transmit High Alarm
is enabled. When the alarm
settings
Transmit High Alarm
and
Repeat High Alarm
are
both enabled for an input channel,
HI Rpt
displays in the top
window.
LO
displays in the bottom window of the alarm field
when the alarm setting
Transmit Low Alarm
is enabled. When
the alarm settings
Transmit Low Alarm
and
Repeat Low
Alarm
are both enabled for an input channel,
LO Rpt
displays
in the bottom window.
•
Debou:
This filter label is an abbreviation for Debounce. When
the channel includes the this filter setting,
Debou
displays in the
top window of the filter field. The top window is empty when
the input channel is not configured with this filter.
•
Input:
This column shows the last reading received by input
channels 1-6 (
Ch1
-
Ch6
). The reading is either
HI
or
LO
,
depending on the reading received by the input channel.
•
Current Read:
This column shows the scaled reading for the
last
Input
reading (raw value) received by each input channel.
The
Current Read
and
Input
columns show the same reading.
•
Accumulator:
This column shows the last accumulator reading
received by input channel 5 (
Ch5
). For all other input channels,
the
Accumulator
column displays dashes.