American Innovations APM4AM-SAT WS, Руководство по установке и настройке

Страница: 9 / 46

APM4AM-SAT WS Installation and Configuration Guide
3
Mounting Requirements
APM4AM-SAT WS enclosures can be mounted anywhere with a few
precautions. The following list identifies certain conditions to consider
when choosing a location to mount the unit. Mounting hardware suitable
for the type of mounting surface is provided by the customer. For unit
dimensions, refer to Figure 1-1.
1.
Choose an area that is clear of metal structures that may cause radio
signal interference.
2.
Install the unit in an area that provides enough working space to
perform routine maintenance, such as changing the battery or
configuring the unit for service.
3.
The installation area should provide a minimum RSSI of +14dB or
better.
Figure 1-1. Unit Dimensions
APM4AM-SAT WS Receiver
The APM4AM-SAT WS receiver is pre-programmed at the factory with
the transmitters mapped to alarm outputs 1 - 6. The first transmitter is
programmed to channel 1. Additional transmitters are programmed
according to the mapping shown in Figure 1-2. A total of 7 transmitters
can be used with each unit.