American Innovations APM4AM-SAT WS, Руководство по установке и настройке

Страница: 33 / 46

APM4AM-SAT WS Installation and Configuration Guide
27
Figure 2-8. Controller Clock Configuration
2.
If your computer is setup with the correct date and time, click the
Set to PC Time
check box and then click
Save
.
A check mark inside the check box indicates the setting is enabled.
To disable the setting, remove the check mark by clicking the check
box again.
3.
If you do not want to set the controller clock with the same time as
your PC:
a.
Select the time field you want to change in the
Controller time
text box.
b.
Click the up or down arrow to move the time forward or
backward.
Configuring a Transmission Schedule
As an option, you can include a SN Delay (serial number delay) in the
transmission time. The last three digits of the unit serial number serve as
the number of seconds that are added to the transmission time. Because
each unit is assigned a unique serial number, using the SN Delay allows
you to configure all units with the same transmission time. The actual
transmission time is offset by the SN Delay to prevent all units from
transmitting at exactly the same time.
Complete the following steps to configure the unit with a transmission
schedule:
1.
Click
Change
in the
Transmission Schedule
box on the main
configuration window to display the
Transmission Schedule
configuration window (Figure 2-9)