American Dryer Corp. ADG-530D II Скачать руководство пользователя

Страница: 9 / 57

7. A program

should be

established for the inspection and cleaning of lint in the burner area, exhaust

ductwork, and area around the back of the dryer. The frequency of inspection and cleaning can best be
determined from experience at each location.

WARNING:

The collection of lint in the burner area and exhaust ductwork can create a potential fire
hazard.

8. For personal safety, the dryer

must be

electrically grounded in accordance with local codes and/or the

National Electrical Code ANSI/NFPA NO. 70-LATEST EDITION or in Canada, the Canadian Electrical
Codes Parts 1 & 2 CSA C22.1-1990 or LATEST EDITION.

NOTE:

Failure to do so will VOID THE WARRANTY.

UNDER

CIRCUMSTANCES

should the dryer door switches, lint drawer switch, or heat safety

circuit, ever be disabled.

WARNING: PERSONAL INJURY OR FIRE COULD RESULT.

10. This dryer is not to be used in the presence of dry cleaning solvents or fumes.

11. Remove articles from the dryer as soon as the drying cycle has been completed.

WARNING:

Articles left in the dryer after the drying and cooling cycles have been completed can
create a fire hazard.

12.

READ AND FOLLOW ALL CAUTION AND DIRECTION LABELS ATTACHED TO THE
DRYER.

13. For safety, proper operation, and optimum performance, the dryer

must not be

operated with a load less

than sixty-six percent (66%), 40 lbs (18 kg) of its rated capacity.

WARNING: YOU MUST DISCONNECT AND LOCKOUT THE ELECTRIC SUPPLY AND

THE GAS SUPPLY BEFORE ANY COVERS OR GUARDS ARE REMOVED
FROM THE MACHINE TO ALLOW ACCESS FOR CLEANING,
ADJUSTING, INSTALLATION, OR TESTING OF ANY EQUIPMENT PER
OSHA

(Occupational Safety and Health Administration)

STANDARDS.

IMPORTANT: Dryer must be installed in a location/environment, which the ambient

temperature remains between 40º F (4.44º C) and 130º F (54.44º C).

Содержание ADG-530D II


























































Результаты поиска

Содержание ADG-530D II

Отзывы:

Похожие инструкции для ADG-530D II

Бренды по названию

Популярные бренды

American Dryer Corp. ADG-530D II, Руководство по установке

Результаты поиска

Содержание ADG-530D II

Отзывы:

Похожие инструкции для ADG-530D II

Бренды по названию

Популярные бренды