American Access XM Скачать руководство пользователя страница 36

Страница: 36 / 39

Final Check of installed system

•

Ensure that all fasteners are in place and secure

•

Walk on the installed system and check for any unstableness or loose rails

•

Ensure that the level and slope has not changed during your installation.

•

Remove any debris from job site.

•

Ensure your tools have been recovered during installation

CONGRATULATIONS!

Your American Access, Inc.

System is complete

PERIODIC MAINTENANCE AND SAFETY TIPS:

IMPORTANT: Use ramp system with a qualified helper

Always use your lap belt on your personal mobility device

It is important that you refer to your chair or scooter Owner

’

s Guide for the proper de-

gree of incline/decline and chair direction before attempting ramp use. Never exceed
the recommendations listed in the owner

’

s manual.

Periodically check and tighten any loose fasteners to ensure safety.

Avoid alkaloid detergents

Do not allow children to play on or near the ramp.

Keep ramp and platform surface clean from debris at all times.

Do not use handrails or ramp to support planters, bird houses, decorations, etc.

Ramp surface may become slippery when wet.

10.

If any part of the ramp is damaged or loose, DO NOT USE UNTIL REPAIRS CAN BE
MADE BY A CERTIFIED INSTALLER OR OTHER QUALIFIED PERSON.

Содержание XM








































Результаты поиска

Содержание XM

Отзывы:

Похожие инструкции для XM

Бренды по названию

Популярные бренды

American Access XM, Руководство по установке

Результаты поиска

Содержание XM

Отзывы:

Похожие инструкции для XM

Бренды по названию

Популярные бренды