American Access XM, Руководство по установке

Страница: 32 / 39

32
End Transition Tread Assembly
•
The End Transition Tread (TT36) is secured to the end of the ramp by sliding it from left or right onto the female
groove at the end of the ramp. The Under Lip of the TT36 will keep it from lifting off. (FIG 1 and 2)
•
To keep the transition tread from sliding left to right, Screw in a #8 Tek screw in the end of the female groove
where the lip of the transition tread sits. This should “ wedge ” the Tek screw in this space and lock the tread from
movement.
(FIG 3)
FIG. 1
FIG. 2
RAMP
FIG. 3
Screw in a #8 Tek screw in the end of the female
groove where the lip of the transition tread sits.
STARTER
RAMP
(TT36) 1’ x 36”
FIG. 2
STARTER RAMP
TT36— 1’ X 36”