Amazone Pantera 4504 Скачать руководство пользователя страница 95

Страница: 95 / 286

Structure and function, carrier vehicle

Pantera 4504 CP plus BAG0230.2 07.21

WARNING

Risk of crushing, cutting, being caught or drawn in, or impact
through the accidentally rolling machine, if the service brake is
released.



Always couple the hose coupling on the brake line (yellow) first
and then the hose coupling on the supply line (red).



The service brake on the machine is immediately released from
the brake setting if the red hose coupling is coupled.



Always uncouple the supply line hose coupling (red) first, and
then the brake line hose coupling (yellow).



The service brake of the machine only moves into the brake
position when the red hose coupling has been uncoupled.



Halten Sie diese Reihenfolge unbedingt ein, da sonst die Be-
triebs-Bremsanlage löst und sich die ungebremste Maschine in
Bewegung setzen kann.

WARNING

Risk of crushing from unintentional starting and rolling of the
machine and trailer when coupling or uncoupling!

Secure the machine and trailer against unintentional start-up and
rolling before entering the danger area between the machine and
trailer.

WARNING

Risk of crushing when coupling the machine and standing be-
tween the machine and the trailer!

Instruct people to leave the danger area between the machine and
the trailer before you approach the trailer.

Coupling the trailer via the automatic drawbar is a one-man operation.

Helpers as guides are not necessary.

Содержание Pantera 4504































































































































































































































































































Результаты поиска

Содержание Pantera 4504

Отзывы:

Бренды по названию

Популярные бренды

Amazone Pantera 4504, Руководство по эксплуатации

Результаты поиска

Содержание Pantera 4504

Отзывы:

Бренды по названию

Популярные бренды