Amazone Pantera 4504, Руководство по эксплуатации

Страница: 185 / 286

Using the field sprayer
Pantera 4504 CP plus BAG0230.2 07.21 185
12.2 Spraying operation
Special instructions for spraying operation

Test the field sprayer by carrying out calibration

before the start of the season.

in the case of deviations between the actual indicated spray
pressure and the spray pressure prescribed in the spray
table.

Before starting spraying, determine the exact spray rate re-
quired, referring to the instructions of the crop protection agent
manufacturer.

Before you start spraying, enter the required spray rate (target
rate) in control terminal.

During spraying operation, precisely adhere to the required
spray rate [l/ha]

in order to achieve the best possible results from your crop
protection measure.

to avoid unnecessary pollution of the environment.

Select the required nozzle type from the spray table before
spraying starts, taking account of

the intended operational speed,

the required spray rate and

the required atomisation characteristic (fine, medium or
coarse-dropped) of the crop protection agent used for the
crop protection measure.

Refer to the section "Spray tables for flat-fan, anti-drift, injector
and airmix nozzles", Seite 274.

Select the required nozzle size from the spray table before
spraying starts, taking account of

the intended operational speed,

the required spray rate and

the target spray pressure.

Refer to the section "Spray tables for flat-fan, anti-drift, injector
and airmix nozzles", Seite 274.

Select a low operational speed and a low spray pressure to pre-
vent wastage from drifting.

Refer to the section "Spray tables for flat-fan, anti-drift, injector
and airmix nozzles", Seite 274.

At wind speeds of 3 m/s, take additional drift reduction measures
(refer to the section "Measures for drift reduction", page Seite
188.