manualshive.com logo in svg

Amazone Pantera 4504, Руководство по эксплуатации

Поделиться
Скачать
Amazone Pantera 4504 Скачать руководство пользователя страница 28

 

 

 

General Safety Instructions 

 

 

28  

Pantera 4504 CP plus  BAG0230.2  07.21

 

2.16 

34B

Safety information for users 

 

WARNING 

Risk of crushing, cutting, being trapped or drawn in, or impact 
through inadequate roadworthiness and operational safety. 

Before starting up the machine and the tractor, always check their 
roadworthiness and operational safety. 

2.16.1 

134B

General safety and accident prevention information 

 

 

Beside these instructions, comply with the generally applicable 
national safety and accident prevention regulations. 

 

The warning symbols and other labels attached to the machine 
provide important information on safe machine operation. Com-
pliance with this information is in the interests of your safety. 

 

Before moving off and starting up the machine, check the imme-
diate area of the machine (children). Ensure that you can see 
clearly.  

 

Drive in such a way that you always have full control over the 
tractor with the attached machine. 

 

  In so doing, take your personal abilities into account, as well as 

the road, traffic, visibility and weather conditions, the driving 
characteristics of the tractor and the connected machine.  

Use of the machine 

 

 

Before the engine is started, convince yourself that all drives are 
switched off. 

 

Before starting work, ensure that you understand all the equip-
ment and actuation elements of the machine and their function. 
There is no time for this when the machine is already in opera-
tion. 

 

Do not wear loose-fitting clothing. Loose clothing increases the 
risk of being caught by the drive shaft. 

 

Only start-up the machine, when all the safety equipment has 
been attached and is in the safety position. 

 

Before starting work on the machine, check for damage or wear 
as well as leaking coolant or spray fluids. Check nuts and bolts 
regularly for tightness and re-tighten if necessary 

 

Comply with the maximum load for the machine. If necessary, 
drive only with a partially filled tank. 

 

The driving behaviour of the machine is influenced by the weight 
in the tank. 

 

It is forbidden to stand in the working area of the machine. 

 

It is forbidden to stand in the turning and swivel range of the 
machine.

 There are crushing and cutting points at externally-

actuated (e.g. hydraulic) machine points. 

 

Only actuate externally-actuated machine parts when you are 
sure that no-one is standing within the prescribed safety dis-
tance.  

 

Содержание Pantera 4504































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды