Amazone Pantera 4504, Руководство по эксплуатации

Страница: 240 / 286

Cleaning, maintenance and repair
240 Pantera 4504 CP plus BAG0230.2 07.21

If the warning light is illuminated at the maximum fan level, the
external air filters are fully loaded.

If the pressure display still signalises insufficient positive pres-
sure in the cab, install new filter elements.

If the warning light is illuminated permanently despite installing
new filter elements, check the cab and the air ducts for leaks.
Changing the filter
WARNING
Health risk from breathing in the filtered particles or skin con-
tact!
When working on the opened filter housing, wear respiratory protec-
tion, protective gloves and suitable protective clothing.
Regardless of the machine's operational hours, the following service
intervals apply:

Filter change for activated carbon filter every 3 months (Catego-
ry 4 operation)

Filter change for dust aerosol every 6 months
Only perform checks and filter changes outside of the contaminated
area and when the ignition is deactivated. Wear protective gloves.
1. Disconnect the central connector on the housing to interrupt the
power supply.
2. Clean the filter inlet housing with a moist cloth after removing the
used filter.
3. Check the housing and seals for damage.
4. Insert a new filter.
5. Ensure that the filter is properly inserted to ensure a complete
seal.
6. Ensure that the housing lid is properly positioned.
7. Ensure that the sequence of the filter elements is observed.
8. After changing the filter, run the cab air filtering at the lowest
level.