5.
Move the track disc to the desired position.
6.
Tighten the bolts.
With the adjacent pegging holes, the set track width
a
can be varied.
7.
Release the pins
1
and
2
from the pegging
hole.
8.
To reduce the track width of the tramline
marker by 20 cm,
insert the pin in position
-
,
or
to increase the track width of the tramline
marker by 20 cm,
insert the pin in position
+
.
9.
To secure the pin in the adjuster segment,
turn the pin down.
10.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
CMS-I-00003170
6.3.13.3 Adjusting the track disc pitch
1.
Loosen the nut
4
.
2.
To increase the effect of the track disc
1
,
increase the pitch
+
or
To reduce the effect of the track disc,
reduce the pitch
-
.
3.
Move the clamping part
3
in the grid
2
to the
desired position.
4.
Tighten the nut.
5.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
CMS-I-00003171
CMS-T-00004377-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6545-EN-II | B.1 | 22.07.2021
67
