6.3.12.2 Adjusting the position of the harrow tines on seed drills without exact following harrow lift
When the exact following harrow is properly adjusted,
the harrow tines rest horizontally on the ground and
have 50-80 mm downward play.
To make adjustments, the distance
A
between the
carrier tube and the ground is adjusted. The distance
must be 230-280 mm.
A
CMS-I-00004668
CAUTION
Danger of injury due to the exact
following harrow falling down
The length of the turnbuckles may not
exceed 390 mm; otherwise, the turnbuckle
is opened and the exact following harrow fall
down.
Do not set the turnbuckles at lengths of
more than 390 mm.
1.
Loosen the lock nut
1
.
2.
Turn the turnbuckle
2
to the desired
measurement. The measurement
A
may not
exceed 390 mm.
3.
Tighten the lock nut.
4.
Make the same setting for the other side of the
implement.
5.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
2
A
1
CMS-I-00004708
CMS-T-00006414-A.1
6 | Preparing the machine
Preparing the implement for operation
MG6545-EN-II | B.1 | 22.07.2021
61
