1.
Activate the function on implements with
Comfort hydraulic system,
see ISOBUS software operating manual "Pre-
selection for hydraulic functions".
2.
Adjust the values for the coulter pressure on
implements with Comfort hydraulic system,
see ISOBUS software operating manual "Coulter
pressure settings".
3.
To increase the coulter pressure,
actuate the "green 1" tractor control unit
or
To reduce the coulter pressure,
actuate the "green 2" tractor control unit.
4.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
6.3.7 Adjusting the coulter pressure mechanically
NOTE
The adjustment of the coulter pressure must be
adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
1.
Raise the implement.
2.
Put the universal operating tool on the adjustment
spindle
1
.
3.
To reduce the coulter pressure,
turn the universal operating tool counter-
clockwise
-
or
To increase the coulter pressure,
turn the universal operating tool clockwise
+
4.
The scale
3
serves as orientation.
CMS-I-00004579
CMS-T-00006426-A.1
6 | Preparing the machine
Preparing the implement for operation
MG6545-EN-II | B.1 | 22.07.2021
55
